标题: 3.29 录制轨道输出——REAPER用户手册中文版 [打印本页] 作者: 琴韵晓波 时间: 2021-6-29 10:40 标题: 3.29 录制轨道输出——REAPER用户手册中文版 3.29 Recording a Track’s Output
3.29 录制轨道输出
There are a number of reasons why you might wish to record a track's audio output. One example might be torecord the output from an external synthesizer directly onto an audio track. Another might be to record theoutput generated by a receive from another track. Here is an example of how you might do this:
您可能希望录制轨道音频输出的原因有很多。一个例子可能是将外部合成器的输出直接录制到音频轨上。另一种可能是录制接收从另一个轨道生成的输出。下面是一个示例,说明了如何执行此操作:
1. If recording from an external synth, connect the MIDI keyboard to your PC. Make sure it is enabled in your MIDI device preferences.
1.如果从外部合成器录制,请将MIDI键盘连接到电脑。确保在MIDI设备首选项中启用了该选项。
2. Create a new track. Name it and arm it for recording. Enable input monitoring.
2.新建轨道。命名,并预备录音。启用输入监听。
3. From the record arm context menu select Record: output then your required channel options. Most often this is likely to be mono, latency compensated, but options are also available for stereo and multichannel, with or without latency compensation.
3、从录音预备上下文菜单中选择“录音: 输出”,然后选择所需的通道选项。通常情况下,这可能是“单声道,延迟补偿”,但也可以选择立体声和多通道,有无延迟补偿。
4. From the same menu select your required output mode. Available options are post fader (the default), post-fx/pre-fader or pre fx.
4.从同一菜单中选择所需的输出模式。可用选项有“推子后(默认)”、“fx后、推子前”或“fx前”。
5. If recording from an external synth, select Input: MIDI, then select your input device from the menu .
5.如果从外部合成器录制,请选择“输入:MIDI”,然后从菜单中选择您的输入设备。
6. Make such adjustments as you might need (e.g. to the synth parameters) while you audition the music.
6.在试听音乐时,根据需要进行调整(例如,调整合成器参数)。
7. When ready, record.
7.准备好后,进行录音。
8. Stop recording when finished.
8.录制结束后停止录音。 作者: 琴韵晓波 时间: 2021-6-29 11:13 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面