The REAPER Track Defaults settings includes a number of items that you can use to help make the recordingprocess a little easier.
REAPER轨道默认设置包括许多项目,您可以使用这些项目来帮助简化录制过程。
These settings can be found on the Project, Track/Send Defaults page of theOptions, Preferences window.
这些设置可在“选项”--“首选项”--“工程”--“轨道/发送默认设置”页面中找到。
Settings on this page include:
此页上的设置包括:
? The default gain level for the track’s volume fader.
“轨道音量推子默认增益”,设置轨道音量推子的默认增益电平。
? Whether output should be routed to the Main send.
“主(父级)发送”,是否应将输出路由到主发送。
? The default new track height.
“新工程的默认轨道高度”,设置默认的新轨道高度。
? Whether to enable by default Free item positioning or Fixed item lanes. Unless you specifically need it to be otherwise, leave both these off.
“自由摆放对象位置”与“固定对象子轨”,是否在默认情况下启用“自由摆放对象位置”或“固定对象子轨”。除非你特别需要，否则这两项都不要做。
? Whether new tracks are automatically armed for recording.
“录音预备”,设置新轨道是否自动预备录音。
? A Record Config option to set defaults for the Record Arm context menu. Options include, to turn on by default Input Monitoring and specify default record input settings.
“……”,录音配置选项,用于设置录音预备菜单的默认值。选项包括,在默认情况下打开输入监听,与指定默认录音输入设置。
Notice also that under Options, Preferences, Appearance, Track Control Panels there are settings whichtogether determine how your track VU meters are presented.
另请注意,在“选项”--“首选项”--“外观”--“轨道控制面板”下,有一些设置共同决定了您的轨道VU表的显示方式。
For example, you can choose whether or not to Show track input when record armed and to Makeobvious that track input is clickable.
例如,您可以选择在预备录音时是否显示轨道输入,以及使轨道输入可点击。
Disabling this latter option may improve the clarity of the display on your VU meters.
禁用后一个选项可能会提高VU表上显示的清晰度。
Enabling Show db scales on record armed track meters and Sticky Clip Indicators helps you to monitor peak levels. MIDI users may wish to Show MIDI velocity on track VU and/or Show MIDI output activity on track VU.
启用“在录音预备的轨道仪表上显示分贝刻度”和“粘性削波指示器”,可帮助您监听峰值电平。MIDI用户可能希望,“在轨道VU上显示MIDI力度”和“在轨道VU上显示MIDI输出活动”。
You can also specify whether to Reset peak indicators on play/seek. If enabled, the numeric peak indicators on track and master VU meterswill cleared when playback is restarted or the play cursor moved.
您还可以指定是否在播放/寻轨时重置峰值指示器。如果启用,当重新开始播放或移动播放光标时,轨道和主控VU表上的数字峰值指示器将会清除。
There is also a global option for Track meters display pre-fader levels. This setting is also available fromREAPER’s Options menu.
还有一个全局选项,用于轨道电平表显示推子前电平。此设置也可从REAPER的“选项”菜单中找到。 作者: 琴韵晓波 时间: 2021-6-29 11:14 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面