标题: 12.17 使用FX参数MIDI学习——REAPER用户手册中文版 [打印本页] 作者: 琴韵晓波 时间: 2021-7-2 15:20 标题: 12.17 使用FX参数MIDI学习——REAPER用户手册中文版 12.17 Using FX Parameter MIDI Learn
12.17 使用FX参数MIDI学习
In Chapters 2 and 6 we looked at some uses for the Param button in REAPER's FX plug-in windows. In chapters 16 and 17 you'll see how this can also be used to create automation envelopes and for parameter modulation. In this section, we will explain how to assign control of an FX parameter to an external device.
在第2章和第6章中,我们研究了REAPERFX插件窗口中参数按钮的一些用法。在第16章和第17章中,您将看到这也可以用于创建自动化包络和参数调制。在本节中,我们将解释如何将FX参数的控制分配给外部设备。
When you touch the control in the FX window with your mouse and then click on the Param button, then choose Learn the Learn window is displayed (see below). Twiddling the control (such as fader or rotary) on your control surface device will cause information to be displayed in the Command window about the channel and CC assignment for this control. This information is picked up from the control surface.
当你用鼠标触碰FX窗口中的控件,然后点击学习,就会显示学习窗口(见下文)。在控制面设备上随意移动控件(如推子或旋钮)将导致在命令窗口中显示有关该控件的通道和CC分配的信息。此信息是从控制面设备中提取的。
Choice of CC mode (absolute or relative) will depend on the parameter being assigned and your own control device. In many cases, absolute mode with soft takeover will be appropriate, but you may need to experiment.
CC模式(绝对或相对)的选择将取决于所分配的参数和您自己的控制器设备。在许多情况下,采用软接管的绝对模式是合适的,但您可能需要尝试一下。
Soft takeover: if enabled, the learned parameter will not be changed by moving a MIDI knob or fader until the MIDI knob/fader equals the value on the screen.
软接管:如果启用,学习的参数不会通过移动MIDI旋钮或推子进行更改,直到MIDI旋钮/推子等于屏幕上的值。
For example, if the current value of a parameter is (say) 100 and the controlling hardware slider is (say) 30, then with soft takeover enabled moving the fader will not cause any change to the parameter value until the value of the fader itself nears 100. If the fader is then moved to (say) 120, then the parameter value will also be moved to 120.
例如,如果参数的当前值是100,而控制器硬件滑块是30,则在启用软接管的情况下,移动推子不会导致参数值发生任何变化,直到推子本身的值接近100。如果推子随后移动到120,则参数值也将移动到120。
The options to Enable only when effect configuration is focused/visible can be used to ensure that this control surface assignment will only be used when that plug-in has focus and/or is visible. This enables you to assign the same control surface fader to any number of different functions with different plug-ins. For example, the same fader used to control EQ gain in one plug-in could also be used to control the threshold setting on a compressor.
“仅在效果配置聚焦/可见时启用”的选项可用于确保仅当插件具有焦点和/或可见时才使用此控制面的分配。这使您能够使用不同的插件将相同的控制面推子分配给任意数量的不同功能。例如,在一个插件中用于控制EQ增益的相同推子也可以用于控制压缩器上的阈值设置。
When one or more parameters in a plug-in has been assigned to a control surface, you will see an extra command on the Param menu - Default controller mappings.
当插件中的一个或多个参数被指定给控制面时,您将在参数菜单上看到一个额外的命令——默认控制器映射。
This leads to a flyout menu with three options - Use default, Save as default, and Clear default. You can thus use this menu to save these settings as the default for this plug-in, so that these controls will be automatically made available whenever that plug-in is loaded into other tracks.
这将出现一个弹出菜单,其中包含三个选项:使用默认值、另存为默认值和清除默认值。因此,您可以使用此菜单将这些设置保存为该插件的默认设置,以便无论何时将该插件加载到其他轨道中,这些控制都将自动可用。 作者: 琴韵晓波 时间: 2021-7-2 15:36 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面