This mode lets you try out changes to parameter values (e.g. volume level or pan position) without writing them to envelopes. When your parameter settings are right you can then use an action to write them to your envelope(s). Let's start by working thru a relatively simple example, before introducing some of the other options that are available.
此模式使您可以尝试更改参数值(例如音量或声像位置),而无需实际将其写入包络。当您对参数设置满意时,您可以使用一个操作将其写入您的包络。在介绍其他一些可用的选项之前,我们先从一个相对简单的示例开始。
Example
示例
1. We want to increase the volume of the featured instrument during the break. We have added a time selection and a volume envelope to the track and inserted points at the start and end of the break. Automation for the bouzouki is set to latch preview mode. If the automation button is not visible this can be set from the right click context menu.
1.我们想在休息时增加特色乐器的音量。我们为轨道添加了一个时间选区和一个音量包络,并在休息的开始和结束处插入了点。bouzouki的自动化设置为“锁存预览”模式。如果“自动化”按钮不可见,可以通过右键单击上下文菜单进行设置。
2. We play the song, adjusting the volume control until we are happy with the level (in this case at +2.17dB). Notice, however, that the envelope has not yet been changed.
2.我们播放歌曲,调整音量控制,直到我们对音量满意为止(在本例中为+2.17dB)。然而,请注意,包络尚未更改。
3. We now display the actions list (Actions, Show action list) and run Automation: Write current values for actively-writing envelopes to time selection. The envelope is now adjusted (see below). Finally we can reset the track automation to trim/read mode.
3.现在,我们将显示操作列表(“操作”、“显示操作列表”),并运行操作“自动化: 写入已主动记录到包络中的当前值到时间选区”。现在包络被调整了(见下文)。最后,我们可以将轨道自动化重置为“修剪/读取”模式。
You can use latch preview mode on more than one envelope on a track, or on more than one track. You might want to use “write to” options other than to time selection. Keeping this in mind, here is a summary of the main actions available. These can be assigned to keyboard shortcuts, toolbars, and/or menus (Chapter 15). Set/Write/Clear Automation Mode Actions (see Actions List for full list)
可以在一条轨道上的多个包络或多条轨道上使用锁定预览模式。您可能希望使用“写入到”选项,而不是“时间选区”。记住这一点,以下是可用的主要操作的摘要。这些可以指定给键盘快捷键、工具栏和/或菜单(第15章)。设置/写入/清除自动化模式操作(完整列表请参见操作列表)
Set automation mode actions:
设置自动化模式操作:
Automation: Set track automation mode to … [latch or latch preview or read or touch or trim/read or write]
自动化: 设置轨道自动化模式为... [“锁存”或“锁存预览”或“读取”或“触碰”或“修剪/读取”或“写入”]模式
Automation: Set all tracks automation mode to … [latch or latch preview or read or touch or trim/read or write)
自动化: 设置全部轨道的自动化模式为... [“锁存”或“锁存预览”或“读取”或“触碰”或“修剪/读取”或“写入”]
Global automation override: All automation in… … [latch or latch preview or read or touch or trim/read or write] mode
全局自动化覆盖: 全部自动化处于... [“锁存”或“锁存预览”或“读取”或“触碰”或“修剪/读取”或“写入”]模式
Automation write actions:
自动化写入操作:
Automation: write current values for actively-writing envelopes to [entire project or time selection]
自动化: 写入已主动记录到包络中的当前值到 [“整个工程”或“时间选区”]
Automation: write current values for actively-writing envelopes from cursor to [entire project or first touch position or start of project]
自动化: 写入已主动记录到包络中的当前值,从光标处到 [“整个工程”或“第一个触碰点位置”或“工程开始位置”]
Automation: write current values for all writing envelopes [from cursor to end project or from cursor to start of project or to time selection]
自动化: 写入全部已记录到包络中的当前值 [“从光标到工程结束位置”或“从光标到工程开始位置”或“到时间选区”]
Options: Preserve trailing values when recording automation.
选项: 录制自动化时保留尾随值。
Latch clear actions:
锁存清除操作:
Automation: Clear [track or all track] envelope latches
自动化: 清除 [“轨道”或“全部轨道”]包络“锁存”
These options together should provide you with all you need for your latch automation preview requirements. For a greater in-depth understanding of this and other advanced automation features, go to
这些选项加在一起应该可以满足您的锁存自动化预览要求。要更深入地了解此功能和其他高级自动化功能,请访问 http://wiki.cockos.com/wiki/index.php/AdvancedAutomation 作者: 琴韵晓波 时间: 2021-7-4 13:11 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面