If using hardware output sends with any of your tracks you will find that you can automate the Volume, Pan and Mute parameters for these sends. These items will appear in the track’s envelopes window as shown on the right.
如果使用硬件输出与任何轨道一起发送,您会发现您可以自动化这些发送的“音量”、“声像”和“静音”参数。这些项目将显示在轨道的包络窗口中,如右侧所示。
In the example shown, we have a send from Track 1 to an Audio Hardware Output. We can now control the send volume with an envelope. We can even go one better. We can use fader movements to shape this envelope, but without using Write mode for any other envelopes that we may also have created. This can be done from within the track’s routing window.
在所示的示例中,我们有一个从轨道1到音频硬件输出的发送。我们现在可以使用包络控制发送音量。我们甚至可以做得更好。我们可以使用推子移动来塑造这个包络,但不需要对我们可能创建的任何其他包络使用“写入”模式。这可以在轨道的路由窗口中完成。
In the screen shot below automation mode has been set to Touch from within the routing window, just for that one envelope. You could now play your track, adjusting the audio hardware output send fader in the window shown above to adjust the send volume level and create your envelope. You can also do this with Track Send envelopes.
在下面的屏幕截图中,自动化模式已从路由窗口内设置为“触碰”,仅针对这一个包络。现在,您可以播放轨道,在上面显示的窗口中调整音频硬件输出发送推子,以调整发送音量电平并创建包络。也可以使用“轨道发送包络”来执行此操作。 作者: 琴韵晓波 时间: 2021-7-4 13:16 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面