This example uses MIDI buses. It builds on the model presented in Example 2 (above).
这个例子使用MIDI总线。它建立在示例2中提供的模型之上。
Using REAPER’s MIDI Bus architecture you can use parameter modulation to control one instrument’s parameters with messages produced by and sent from another. For example, you could use the volume of synth 1 to control, say, the volume of synth 2. Adding an envelope can automate this process.
使用REAPER的MIDI总线架构,您可以使用参数调制,来控制一种乐器的参数,这些消息由另一种乐器产生和发送。例如,您可以使用合成器1的音量来控制合成器2的音量。添加包络可以使此过程自动化。
Synth 2 (in this example) receives its MIDI input on MIDI bus 3. We therefore direct MIDI output from synth 1 to MIDI Bus 3 (see right). You can then select the control on Synth 2 (in this example, volume), click on the Param button and choose Parameter modulation/MIDI link to use parameter modulation to accept the incoming data from Synth 1 (shown below right).
本例中,合成器2,在MIDI总线3上接收其MIDI输入。因此,我们将合成器1的MIDI输出定向到MIDI总线3。然后,您可以选择合成器2上的控件,在本例中为音量,单击参数按钮,然后选择“参数调制/MIDI链接”,以使用参数调制来接受来自合成器1的传入数据)。
Parameter Modulation (Audio)
参数调制(音频)
Audio parameter modulation, of course, is a separate issue from MIDI buses, but it is worth remembering that you can include both types of parameter modulation within a single FX chain.
当然,音频参数调制与MIDI总线是两个不同的问题,但值得记住的是,您可以在单个FX链中,包括这两种类型的参数调制。
We can add REAPER’s audio routing capabilities into the model. The example above includes ReaVerbate. By sidechaining audio output to additional channels, we use the audio signal on channels 3/4 from one or more synth to control the wet/dry reverb mix. Alternately, by setting up separate sidechains (3/4, and 5/6) for each synth, you could use the audio streams from the different synths to control different parameters on your various VST plug-ins.
我们可以将REAPER的音频路由功能添加到模型中。上面的示例包括ReaVerbate。通过将音频输出侧链到其他通道,我们使用来自一个或多个合成器的通道3/4上的音频信号,来控制湿声/干声混响的混合。或者,通过为每个合成器设置单独的侧链(3/4和5/6),您可以使用来自不同合成器的音频流,来控制各种VST插件上的不同参数。
Note: By default, REAPER uses MIDI Bus 1 for routing MIDI data. Whenever you are not presented with a choice of buses (for example, when recording MIDI data) you should assume it is using Bus 1.
注: 默认情况下,REAPER使用MIDI总线1路由MIDI数据。当您没有看到总线选择时(例如,在录制MIDI数据时),您应该假设它使用的是总线1。
You can download a project file with a completed version of this example at:
您可以在以下位置下载包含此示例的完整版本的工程文件: https://stash.reaper.fm/v/39866/MIDI%20%20Buses%20Demo.rpp 作者: 琴韵晓波 时间: 2021-7-4 13:53 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面