标题: 23.5 在REAPER中使用合成器工作站——REAPER用户手册中文版 [打印本页] 作者: 琴韵晓波 时间: 2021-7-5 11:03 标题: 23.5 在REAPER中使用合成器工作站——REAPER用户手册中文版 23.5 Using REAPER With a Synth Workstation
23.5 在REAPER中使用合成器工作站
ReaRoute can be used to make the functionality of a stand-alone synthesizer available to you when you are working with REAPER. To be able to work thru this example, you will need to already posses a good working knowledge of how to use the synthesizer. Before proceeding, you will need to ensure that your ReaRoute ASIO drivers have been installed and that the Synth Workstation program has been set up to use them.
ReaRoute可以用来让你在使用REAPER时可以使用独立合成器的功能。为了能够完成这个例子,你需要已经具备了如何使用合成器的良好的工作知识。在继续之前,您需要确保您的ReaRoute ASIO驱动程序已安装,并且合成器工作站程序已设置为使用它们。
1. Open REAPER. Open an existing project file, or create a new one and insert a track.
1.打开REAPER。打开现有工程文件,或新建一个工程文件并插入轨道。
2. Arm this track for recording. Turn on input monitoring and set the track input to stereo. Assign a pair of ReaRoute channels (probably 1 and 2) to this input.
2.预备此轨道进行录制。打开输入监听,并将轨道输入设置为立体声。将一对ReaRoute通道(可能是1和2)分配给此输入。
3. Open the synth program and take whatever steps are needed by way of preparation.
3.打开合成器程序,执行准备工作所需的任何步骤。
4. Direct audio output to the same pair of ReaRoute channels that you selected at step 2. (above).
4.将音频输出定向到您在步骤2中选择的同一对ReaRoute通道上(上图)。
5. In REAPER, make sure the play cursor is positioned where you want it. Press Record.
5.在REAPER中,确保播放光标位于您想要的位置。按下录音。
6. Within the synth program, play the instrument(s) to compose a track to accompany your REAPER song. As you do so, REAPER will record it as a wave file.
6.在合成器程序中,演奏乐器以创作一条轨道,为你的REAPER歌曲伴奏。当您这样做时,REAPER会将其录制为波形文件。
7. When finished, save your work.
7.完成后,保存您的工作。 作者: 琴韵晓波 时间: 2021-7-5 11:15 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面