REAPER’s action list (main section) includes five actions which enable you to record MIDI material retroactively. This enables you to experiment with your keyboard so that if you create a passage that you like you can retroactively record it. These actions (which can be assigned to a toolbar if you wish) are:
REAPER的操作列表(“主要”部分)包括五个操作,使您能够录制MIDI材料回溯。这使您可以使用键盘进行实验,这样,如果您创建了一段您喜欢的段落,您可以回溯录制它。这些操作(如果您愿意,可以分配给工具栏)他们是:
【译者注: 以下的操作命令原文与语言包中的对应条目不一致,为了和语言包保持一致,所以以下的操作命令的翻译均采用语言包中的对应翻译】
MIDI: Clear retroactive history
MIDI: 清空回溯MIDI的历史记录
MIDI: Insert all available retroactively recorded for armed and selected tracks
MIDI: 为预备和选中轨道插入全部可用的回溯录制MIDI
MIDI: Insert all available retroactively recorded for armed tracks
MIDI: 为预备轨道插入全部可用的回溯录制MIDI
MIDI: Insert recent retroactively recorded for armed and selected tracks
MIDI: 为预备和选中轨道插入最近的回溯录制MIDI
MIDI: Insert recent retroactively recorded for armed selected tracks
MIDI: 为预备轨道插入最近的回溯录制MIDI
Example
示例
This example uses REAPER’s Virtual MIDI Keyboard, but you could use any installed external MIDI input device.
本例使用了REAPER的虚拟MIDI键盘,但您可以使用任何已安装的外部MIDI输入设备。
1. In Arrange view, create a new track and add a virtual instrument (e,g, ReaSynth) to its FX chain.
1.在排列视图中,创建一个新轨道,并将虚拟乐器(例如ReaSynth)添加到其FX链中。
2. Click on the track’s red record arm button to arm it. Right click over the button and make sure that Monitor input is enabled.
2.单击轨道的红色录音预备按钮以将其预备。右键单击该按钮并启用“监听输入”。
3. Right click on the record arm button, select Input MIDI, then your input device (e.g. Virtual MIDI keyboard), then a channel or All Channels.
3.右键单击录音预备按钮,选择“输入MIDI”,然后选择输入设备(如虚拟MIDI键盘),然后选择一个通道或全部通道。
4. Run the action MIDI: Clear retroactive history to clear out any existing history from the buffer.
4.运行操作“MIDI: 清空回溯MIDI的历史记录”以从缓冲区中清除任何现有的历史记录。
5. Arm the track but do not press the record or play buttons on the transport bar.
5.预备轨道,但不要按下走带条上的录音或播放按钮。
6. Make sure that this track is selected and play a few notes on your input device. Stop playing after a few seconds.
6.确保选中了此轨道,并在输入设备上演奏一些音符。几秒钟后停止演奏。
7. Run the action MIDI: Insert recent retroactively recorded for armed and selected tracks
7.运行操作“MIDI: 为预备和选中轨道插入最近的回溯录制MIDI”
8. The notes that you have just played will be inserted as a new midi item.
8.您刚才演奏的音符将作为新的midi对象插入。 作者: 琴韵晓波 时间: 2022-9-8 17:47 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面