|
|
<
32楼 琴韵晓波说：拖放选项
Drag and Drop Options
拖放选项
One way of creating folders is by dragging and dropping.
创建文件夹的一种方法是拖放。
You identify which track is to be the folder, which are to be its children, then select and drag and drop the children into the folder.
您可以确定哪条轨道将成为文件夹,哪些轨道将成为其子轨道,然后选择并将子轨道拖放到文件夹中。
This method can be rather tricky unless you are precise in your mouse movements.
这种方法可能相当棘手,除非你的鼠标移动准确。
You might recall that in Section 2.28 Managing Tracks of the REAPER User Guide we saw that dragging and dropping track panels up or down the track display can move them and park them in a new position.
您可能还记得,在REAPER用户指南的第2.28节“管理轨道”中,我们看到在轨道显示器上向上或向下拖动轨道面板可以移动轨道面板并将其停放在新位置。
This time, however, that’s not what we want.
然而,这一次,这不是我们想要的。
The trick is to drop the tracks inside a small drop zone used for creating folders.
诀窍是将轨道放置在用于创建文件夹的小放置区内。
The exact area and size if this drop zone will vary with track height and track width: as a guide, think of it as being a rectangle that extends from the bottom left corner of the track panel just over half way up the track height and to its right by just under a quarter of the track width.
如果这个下降区域的确切面积和大小会随着轨道高度和轨道宽度的变化而变化:作为指导,可以将其视为一个矩形,从轨道面板的左下角延伸到轨道高度的一半以上,并向右延伸到轨道宽度的四分之一以下。
You’ll know when you’re there because the mouse cursor will display a folder (as shown above left) rather than a hand (as shown above right).
您将知道何时到达,因为鼠标光标将显示一个文件夹(如左上所示),而不是一只手(如右上所述)。
Tracks 3 and 4 have been selected and dragged up to Track 1, which is to be their folder container track (left).
轨道3和4已被选中并向上拖动到轨道1,这将是它们的文件夹容器轨道(左)。
However, the mouse still displays a hand.
但是,鼠标仍然显示一只手。
If we were to release the mouse now, they would simply be moved to immediately below Track 1.
如果我们现在释放鼠标,它们只需移动到轨道1的正下方即可。
Instead, we move the mouse cursor left into the folder drop zone, so that it changes from a hand to the image of a folder (above right).
相反,我们将鼠标光标向左移动到文件夹放置区域,使其从一只手变为文件夹的图像(右上方)。
We release the mouse, and the two guitar tracks are now placed inside a new folder (left), with Track 1 as the containing folder track.
我们释放鼠标,两条吉他轨道现在被放置在一个新的文件夹(左)中,轨道1作为包含的文件夹轨道。
Note: You can start your drag and drop from any part of the track panel (apart, of course, from the controls themselves), but to place the tracks into a folder you must move the mouse cursor to the folder drop zone before releasing it.
注意:您可以从轨道面板的任何部分开始拖放(当然,除了控件本身),但要将轨道放置到文件夹中,您必须将鼠标光标移动到文件夹放置区域,然后才能释放它。
Notice the small down pointing arrow just above the track number of the folder track (in this case Track 1).
请注意,文件夹轨道(在本例中为“轨道1”)的轨道编号正上方有一个向下的小箭头。
By default, this can be used to toggle the display of child tracks in the folder between normal (as shown by default), minimized and collapsed.
默认情况下,这可用于在正常(默认情况下显示)、最小化和折叠之间切换文件夹中子级轨道的显示。
Shown below is the same folder with its child tracks collapsed.
下面显示的是折叠了子级轨道的同一文件夹。
If you prefer not to use this method for drag and drop there is another option available.
如果您不想使用这种方法进行拖放,还有另一个选项可用。
You can go to Options, Preferences, Editing Behavior, Mouse and turn on When reordering tracks via drag and drop, hold shift key to control folder creation.
您可以转到“选项”、“首选项”、“编辑行为”、“鼠标”,然后启用“通过拖放重新排序轨道时,按住Shift键可控制文件夹的创建”。
Then click OK.
然后单击“确定”。
Simple drag and drop will still move tracks: holding Shift while doing so will create a folder and place adjacent tracks into it.
简单的拖放仍然可以移动轨道:按住Shift键可以创建一个文件夹并将相邻的轨道放入其中。
There will be no need to identify or use a folder drop zone - anywhere in the track panel will do.
无需识别或使用文件夹放置区域——轨道面板中的任何位置都可以。
|
|
发表于 2023-10-26 18:16:41
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
楼主
免责声明：本站网友发表的言论属其个人观点，与本站立场无关！