3.16 非破坏性穿插录音——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
3.16 Non-Destructive Punch Recording
3.16 非破坏性穿插录音

By default, punch recording is not destructive: it creates a new take, but does not destroy the original. To use punch recording, follow this sequence:
默认情况下,穿插录音不会造成破坏:它会创建新片段,但不会破换原始片段。要使用穿插录音,请按以下顺序操作:
1. From the Options menu choose Record mode: time selection auto punch. Set New recording that overlaps existing material to Split existing items and add takes (default). All other options on this submenu should be turned off. Disable toggle repeat on the transport toolbar.
1.从“选项”菜单中选择“录音模式: 自动穿插时间选区”。将“新录音与现有媒体对象重叠时”设置为“分割现有对象并添加片段(默认)”。应关闭此子菜单上的所有其他选项。禁用走带工具栏上的切换重复。
2. Select the track and arm it for recording. Right click on the track panel to open the context menu: make sure that both Fixed item lanes or Free item positioning are both turned off.
2.选择轨道,并启动预备录音。在轨道面板上单击鼠标右键以打开关联菜单: 确保“固定对象子轨”或“自由摆放对象位置”都处于禁用状态。
3. View the Options menu and for now ensure that Show all takes (when room) is not selected. We'll look at this shortly. Also, for this example, make sure that Loop points linked to time selection is not enabled.
3.查看“选项”菜单,现在请确保未选择“显示全部片段(当空间允许时)”。我们稍后将对此进行研究。此外,对于本例,请确保未启用“链接循环点到时间选区”。
4. Make sure that the track output is sent to the Master and (if not using direct monitoring) that Input Monitoring is enabled.
4.确保轨道输出已发送到主控,并且启用了“输入监听”(如果不使用直接监听)。
5. Make sure that the Master output is directed to the audio hardware outputs to which your headphones are connected.
5.确保主控输出指向耳机连接的音频硬件输出。
6. Click once on the existing media item to select it. Click and drag along the arrange background area to select the region that you want to be re-recorded (see above).
6.在现有媒体对象上单击一次,以将其选中。单击并沿排列背景区域拖动,以选择要重新录制的区域(请参见上文)。
7. Press Home or W to rewind the track to the start of the track. Press Esc to clear the time selection.
7.按Home或W键可将轨道倒回到轨道的开头。按Esc键清除时间选区。
8. Press Ctrl R. You will hear the recorded material up to the start of the defined region, where you can rerecord that passage. Press Space to stop when you have finished recording. Accept the option to save your recorded media. Restore normal recording mode when you have finished punch recording.
8.按Ctrl+R。您将听到录制的素材,直到定义的区域开始,在那里您可以重新录制该段落。录制完毕后,按空格键停止。接受保存录制的媒体的选项。完成穿插录音后,恢复正常录音模式。
Your track now contains two media items. What's happened to the originally recorded passage? Well, it's still there and you can still use it if you like. Pressing Ctrl L toggles the display of all takes or active take only (see above). We'll learn more about this soon.
您的轨道现在包含两个媒体对象。最初录制的段落发生了什么事?嗯,它还在那里,如果你愿意的话,你还可以使用它。按Ctrl+L可切换显示全部片段或仅显示活跃片段(请参见上文)。我们将很快了解更多有关这方面的信息。
What if you prefer to use the original recording after all? In that case, simply click on it to select it.
如果你还是喜欢使用原始录音呢?在这种情况下,只需单击它即可选择它。
Non-destructive punch recording with pre-roll The metronome can be used to engage pre-roll before recording starts. This help you to know exactly when to come in when punch recording.
非破坏性穿插录音时使用预卷节拍器可用于在录音开始前进行预卷。这有助于您准确地知道穿插录音时何时进入。
Enable the metronome on your toolbar, then right click over the metronome button to access its settings.
在工具栏上启用节拍器,然后右键单击节拍器按钮以访问其设置。
Enable Pre-roll before recording and (preferably) Start pre-roll at start of measure. You should also specify the number of measures through which you want the pre-roll to play: the default is two.
启用“录音前预滚”,(最好)在小节开始处开始预卷。您还应该指定要播放预卷的小节数: 默认为两小节。
Note: The record button context menu includes the option Monitor track media when recording. If you enable this when punching in, say, a guitar or vocals, regular Monitor Input will cause you to hear both the existing and the new material right up to the punch, and during the punch. Monitor Input (tape auto style) will monitor only the existing materials up to the punch, but both existing and new during the punch.
注意:您可以启用“录音时监听轨道媒体”选项。如果您在穿入吉他或人声时这样做,常规的监听输入,将使您听到现有的和新的素材,直到穿入,以及在穿插的过程中。“监听输入(磁带自动风格)”在穿插之前,将仅监听现有素材,但在穿插期间,既可监听现有素材,也可监听新素材。
Tip: If you make a mistake or change your mind when overdubbing, you can use Ctrl Z to undo the recording or you can select the unwanted media item and use the Delete key to remove it.
提示:如果您在叠加时犯了错误,或改变了主意,您可以使用Ctrl+Z来撤消录制,或者您可以选择不需要的媒体对象,然后使用Delete键将其删除。
Getting to grips with REAPER's various record modes and in particular how they work in combination with other options (such as monitoring) can be somewhat bewildering for new users. An Appendix includes a summary table Troubleshooting Record Modes and Monitoring.
对于新用户来说,掌握REAPER的各种录音模式,特别是它们如何与其他选项(如监听)结合使用,可能会有点令人费解。附录中包括故障排除汇总表,录音模式和监听。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面