21.11 环绕渲染——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
21.11 Surround Rendering
21.11 环绕渲染

When you are rendering a project for surround format, most of the settings will be made as for any other project (such as a stereo mix).
渲染环绕格式的工程时,大多数设置将与任何其他工程(如立体声混音)一样进行。
The one important difference is that you should be sure to select the correct number of channels.
一个重要的区别是,您应该确保选择正确的通道数。
In the example shown here, the project is for 5.1 surround, therefore 6 channels have been selected.
在这里显示的示例中,工程是5.1环绕,因此选择了6个通道。
REAPER will render this project into a single multichannel file. You may later need to convert the interleaved multichannel file into multi-mono files of the type required by Dolby and DTS encoders.
REAPER将把这个工程渲染成一个独立的多通道文件。以后可能需要将交错的多通道文件转换为杜比和DTS编码器所需类型的多个单一通道的文件。
REAPER itself does not do this easily, but there are a number of good tools available which will do this for you.
REAPER本身并不容易做到这一点,但是有很多好的工具可以帮你做到这一点。
These include Wave Agent -
其中包括Wave Agent-
https://www.sounddevices.com/products/wave-agent-software.htm.

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面