标题: 3.30 录制FX总线输出——REAPER用户手册中文版 [打印本页] 作者: 琴韵晓波 时间: 2021-6-29 10:45 标题: 3.30 录制FX总线输出——REAPER用户手册中文版 3.30 Recording FX Bus Output
3.30 录制FX总线输出
You can record the output of an FX bus track. For example, you could record the output of a reverb bus to a stereo audio track, then use stereo or dual panning to adjust its positioning in your mix. Here's how:
您可以录制FX总线轨道的输出。例如,您可以将混响总线的输出录制到立体声轨道,然后使用立体声或双重声像来调整其在混音中的位置。方法如下:
1. Set up a FX Bus track, select it, and arm it for recording.
1.设置一条FX总线轨道,选择它,并将其预备以录音。
2. You might wish to also turn up the track’s Receives to get a good strong signal - you can always turn down the volume when playing it back later.
2.您可能还希望调高轨道的接收,以获得良好的强信号——稍后播放时,您可以随时调低音量。
3. On the record arm context menu, set the track to Monitor Input and chose a Recording Mode. This is likely to be Output, Stereo. Output mode will most likely want to be Post fader.
3.在录音预备上下文菜单上,将轨道设置为监听输入,然后选择录音模式。这可能是输出,立体声。输出模式很可能是推子后。
4. Play the song and monitor the signal level.
4.播放歌曲,并监听信号电平。
5. Rewind to start and press Record. Stop recording when finished.
5.回到开始,然后按录音。完成后停止录音。
Tip: After doing this you will most likely want to mute the sends to the bus and set the bus FX to bypass. It can still be a good idea to leave the FX inserted in the bus, as a record of how the output was produced.
提示:完成此操作后,您很可能希望将发送到总线的信号静音,并将总线fx设置为旁通。将FX插入总线中,作为输出是如何产生的录音,也可能是个好主意。 作者: 琴韵晓波 时间: 2021-6-29 11:13 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面