Output from the master can be directed to one or more of your available hardware outputs. This can be done using the routing matrix. The master routing button (in the Mixer) can also be used to set up and manage your hardware output or outputs.
主控的输出可以定向到一个或多个可用的硬件输出。这可以使用路由矩阵来完成。主控路由按钮(在调音台中)也可用于设置和管理您的一个或多个硬件输出。
Right click on the ROUTING button to display a menu of hardware output options. These can be toggled on and off in any permutation that you require.
右击路由按钮,以显示硬件输出选项菜单。这些选项可以按您需要的任何排列打开和关闭。
Left Click on the ROUTING button to display the master track outputs window. This can be used to control the levels and panning of the signals to the hardware outputs.
左键单击路由按钮,以显示主控轨输出窗口。这可用于控制硬件输出信号的电平和声像。
Notice (below) that for each output you can independently control any or all of the following:
请注意(如下所示),对于每个输出,您可以独立控制以下任何或全部内容:
Toggle Mute on/off. Toggle phase invert.
打开/关闭静音。切换相位翻转。
Set Volume level. Set panning position.
设置音量电平。设置声像位置。 作者: 琴韵晓波 时间: 2021-7-2 14:49 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面