This secton shows you how to set up multi-output VSTis.
本节向您展示如何设置多输出VSTis。
Example 1: Paired Audio Tracks
示例1: 成对的音频轨道
1. Right click over the empty area of the Track Control Panel and from the menu choose Insert virtual instrument on new track…
1.右键单击轨道控制面板的空白区域,然后从菜单中选择“在新轨道上插入虚拟乐器...”。
2. When the FX browser window is shown, doubleclick on the required instrument. This example uses the 8-output version of Grizzly (4 stereo channels). You could use any multi output instrument that you wish.
2.当FX浏览器窗口显示时,双击所需的乐器。此示例使用8输出版本的Grizzly(4个立体声通道)。你可以使用任何你想要的多输出乐器。
3. You will be asked to confirm whether you want the appropriate number of tracks built for the particular instrument that you have chosen (above right). Click on Yes.
3.系统将要求您确认是否要为您选择的特定乐器建立适当数量的轨道。单击是。
4. REAPER will now insert the instrument into the FX chain for the original track, name it. arm it for recording, and create all the additional tracks.
4.REAPER现在会将乐器插入到原始轨道的FX链中,命名他,预备录音,然后创建全部附加的轨道。
5. You now have a single MIDI input track for the VSTi together with four output audio tracks. Notice:
5.现在您有一个用于VSTi的MIDI输入轨道和四个输出轨道。注意:
1). Channels 1/2 from Track 1 are directed to Track 2, Channels 3/4 to Track 3, Channels 5/6 to Track 4 and Channels 7/8 to Track 5.
1).来自轨道1的通道1/2被定向到轨道2,通道3/4被定向到轨道3,通道5/6被定向到轨道4,通道7/8被定向到轨道5。
2). No direct output goes from Track 1 to the Master.
2).轨道1没有直接输出到主控。
3). You're now ready to load your instruments (in this example, a drum kit) and to start playing.
3).现在您已经准备好加载您的乐器(在本例中是一个套鼓),开始演奏。
Note: Instead of steps 1 and 2, you can drag and drop the VSTi from an open FX browser window direct to the empty area of the track control panel.
注: 您可以将VSTi从打开的FX浏览器窗口直接拖放到轨道控制面板的空白区域,而不用直形步骤1和2。
Example 2: Separate MIDI Tracks
示例2: 独立的MIDI轨道
If you want a separate MIDI track for each VSTi output channel, you should use this method. Again, we'll use Grizzly, but you would use the same method for any other multi-output synth.
如果您希望每个VSTi的输出通道都对应一条独立的MIDI轨道,则应使用此方法。同样,我们将使用Grizzly,但是您可以对任何其他多输出的合成器使用相同的方法。
1. Create and name a new track. Open the track’s FX window and add the VSTi to the track’s FX chain.
1.创建并命名新轨道。打开轨道的FX窗口并将VSTi添加到轨道的FX链中。
2. From the FX window Options menu choose Build 16 channels of MIDI routing to this track.
2.从FX窗口的“选项”菜单中选择“为此轨道建立16通道的MIDI路由”。
3. You now have one MIDI track for each channel. The MIDI output of each of the 16 tracks is sent to the track on which you originally inserted the VSTi.
3.现在每个通道都有一条MIDI轨道。16条轨道中每条轨道的MIDI输出都被发送到您最初插入VSTI的轨道。
You have a number of options for assisting you with managing this set of tracks. For example, you can put the MIDI Tracks in one folder, name the folder, color the tracks and hide them in the Mixer. To enable keyboard input for the individual MIDI tracks:
您可以使用多种选项来帮助您管理这组轨道。例如,您可以将MIDI轨道放在一个文件夹中,命名该文件夹,给轨道染色,然后将其在调音台中隐藏。要启用各个MIDI轨道的键盘输入,请执行以下操作:
? Make sure that the VSTi track is not armed for recording.
确保VSTi轨道没有预备录音。
? Select all 16 MIDI tracks.
选择全部16条MIDI轨道。
? Right-click the Record Arm button and turn Input Monitoring button on for all 16 tracks.
右键单击预备录音按钮,并打开全部16条轨道的输入监听按钮。
? For each track, set the MIDI input channel, from 1 to 16.
对于每条轨道,将MIDI输入通道设置为从1到16。 作者: 琴韵晓波 时间: 2021-7-4 10:33 点此转到本章目录点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】点此转到REAPER+SWS+OSARA中文语言包下载页面