The track control panel and track meter context menus include an option to choose what to display on your track meters. These options can be applied to a single track or to a selection of tracks. Use Ctrl A if you wish to select all tracks. They are explained in more detail in the section Master track options and settings (Chapter 11) but in brief are:
轨道控制面板和轨道仪表上下文菜单包括一个选项,用于选择在轨道仪表上显示的内容。这些选项可应用于单条轨道或选中的轨道。如果您希望选择所有轨道,请使用Ctrl+A。它们在主控轨选项和设置部分(第11章)中有更详细的解释,但简而言之是:
Stereo peaks - left and right channel loudness peaks
立体声峰值——左右通道响度峰值
Multichannel peaks - suitable when the media item(s) comprise more than two channels
多通道峰值——适用于媒体对象包含两个以上通道的情况
Stereo RMS - individual root mean squared loudness of each stereo channel
立体声RMS——每个立体声通道的单独均方根响度
Combined RMS - the combined RMS loudness of all audio channels
组合RMS——所有音频通道的组合RMS响度
LUFS-M - Loudness Units Full Scale (momentary)
LUFS-M——全幅响度单位(瞬时)
LUFS-S - Loudness Units Full Scale (short sampled), maximum or current
LUFS-S——全幅响度单位(短时采样)、最大值或当前值
LUFS measures first two channels only
LUFS仅测量前两个通道