3.6 准备并录制多条轨道——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
3.6 To Prepare and Record Multiple Tracks
3.6 准备并录制多条轨道

To prepare multiple tracks for recording you could repeat all of the necessary steps as many times as you require tracks, but that might be tedious - and besides, it’s too easy to make a mistake when selecting your audio inputs. You could end up with one input being recorded more than once, and perhaps another input being accidentally missed out. To avoid this problem, you can follow this sequence:
要准备多条轨道进行录制,您可以根据需要多次重复所有必要的步骤,但这可能会很乏味,此外,在选择音频输入时很容易出错。一个输入可能会被多次录制,另一个输入也可能会被意外遗漏。为了避免此问题,您可以按照以下顺序进行操作:
1. Use the Insert, Multiple tracks command to insert as many tracks as you require. The Insert tracks dialog will be displayed. Select the number of tracks required and choose to insert them After the last touched track or At end of project. Click on OK. Name your new tracks.
1.根据你的需要插入多条轨道,使用“插入”--“多条轨道”命令,将显示插入轨道对话框。选择所需的轨道数,并选择到底是“在最后触碰轨道的下方”插入还是“在工程的最下方”插入。单击确定。给你的新轨道命名。
2. Select all tracks to be recorded. After making your selection, click on the Record Arm button of any one of them to arm the entire selection.
2.选择要录音的所有轨道。做出选择后,单击其中任何一个的录音预备按钮,以预备全部选择。
3. One method is to use the Routing Matrix (Alt R). In this example, four tracks are to be recorded at the same time. By default, all four tracks are at first assigned to the first input (above). If you were to record now, the same signal from the first input would be recorded four times! (Notice that by default, input 1 is also assigned to track 5 - the FX bus - but as this is not armed nothing will be recorded there.)
3.一种方法是使用路由矩阵(Alt+R)。在该示例中,将同时录制四条轨道。默认情况下,所有四条轨道最初都指定给第一个输入(上图)。如果现在录制,第一个输入的相同信号,将录制四次!(另请注意,默认情况下,输入1也分配给轨道5-FX总线-但由于它没有预备,因此不会在那里录制任何内容。)
4. Click in the appropriate cells in the Routing Matrix to assign each track to a different input (see below). The example shown uses audio inputs - Input 1 is to go to Track 1, Input 2 to Track 2 and so on. MIDI inputs may also be selected - these are listed below the audio inputs. You can also right click over any red cell to access the Record Input menu should you wish to do so.
4.单击路由矩阵中的相应单元格,为每条轨道分配一个输入。显示的示例使用音频输入——输入1转到轨道1,输入2转到轨道2,依此类推。也可以选择MIDI输入-这些输入列在音频输入下方。如果您愿意,也可以在任何红色单元格上单击鼠标右键,以访问录音输入菜单。
5. Monitor the strength of the signals and record as before.
5.监听信号的强度,并像以前一样录制。
Tips: Using the Track Control Panel to prepare multiple tracks, Another option is to use the TCP to set up and record your tracks.
提示:使用轨道控制面板准备多条轨道,另一种选择是使用TCP设置和录制轨道。
1. To define the same record settings for multiple tracks, select the required tracks, right-click on the arm record button, then make your choices from the menu. Holding Shift will over-ride this and apply your menu choices to the one track only. Inputs can be assigned to a selection of tracks in a similar way by clicking on the Input button.
1.要为多条轨道定义相同的录音设置,请选择所需的轨道,右键单击预备录音按钮,然后从菜单中进行选择。按住Shift键将覆盖此选项,并将您的菜单选项仅应用于一条轨道。通过单击输入按钮,可以以类似的方式将输入分配给选中的轨道。
2. To assign a series of mono inputs in sequence to a set of tracks, select the tracks then click the Input button of any track in the selection. Next, select Assign inputs sequentially then your required inputs - e.g. in the above example, this would be Mono, Input 1 to Input 4.
2.要将一系列单声道输入按顺序分配给一组轨道,请选择轨道,然后单击所选轨道中任何轨道的输入按钮。接下来,选择“按顺序分配输入”,然后选择您需要的输入——例如,在上面的示例中,这将是单声道,输入1到输入4。
3. To insert a new track at the end of your project, you can simply double click in the Track Control Panel area, just below the last existing track.
3.要在工程的最下方插入新轨道,只需双击轨道控制面板区域,就在最后一个现有轨道的正下方。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面