17.8 其他通道路由/混合插件(概述)——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
17.8 Other Channel Routing/Mixing Plug-ins (Overview)
17.8 其他通道路由/混合插件(概述)

Here is an overview of some of REAPER's other channel routing/mixing plug-ins. You can always check the web sites and the forums for the latest information. This section introduces you to some other plug-ins (not used in these examples) that are specifically designed for use in a multi-channel routing environment.
下面是REAPER的一些其他通道路由插件的概述。您可以随时查看网站和论坛以获取最新信息。本节向您介绍一些专门为在多通道路由环境中使用而设计的其他插件(未在这些示例中使用)。
JS: 8x Mono to 1X Stereo Mixer and JS:*x Stereo to 1X Stereo Mixer
JS: 8x单声道到1X立体声混音器和JS: *x立体声到1X立体声混音器
Similar to each other, but allows eight separate stereo or mono audio streams to be mixed into one.
彼此相似,但允许将八个独立的立体声或单声道音频流混合为一个。
JS 8-Channel Input Switcher
JS 8通道输入切换器
This is a channel switching utility. Output Source selects which of up to four paired inputs channel is to be monitored, and the Level faders adjust the gain independently for each pair. Useful for A/B comparisons.
这是一个通道切换实用程序。“输出来源”: 选择最多四个成对输入通道中的哪一个进行监听,电平推子独立调整每对的增益。对于A/B比较很有用。
JS SwixMitch
This crossfade utility allows you to feed up to four input pairs to two busses then mix those busses to output channels 1+2. The destination for each of the four paired inputs can be set to Off, A, B, or A+B.
该交叉转换实用程序允许您将最多四个输入对馈送到两条总线,然后将这些总线混合到输出通道1+2。四个成对的输入的目标都可以设置为OFF、A、B或A+B。
JS Channel Router w/ Polarity
JS 通道级性路由器
Takes an input channel pair signal and modifies the phase according to the selected mode. The modified signal is output on the selected output channels. Only the selected output channels are modified so, for example, a signal received from inputs 1+2 and output on 3+4 will still be present in its original form at outputs 1+2. The Input and Output parameters select which paired channels are used for input and output. Phase Mode can be set to No Change, Invert Left Channel Only, Invert Right Channel Only or Invert Both Channels.
获取输入通道对信号,并根据所选模式修改相位。修改后的信号在选中的输出通道上输出。例如,只有选中的输出通道被修改,因为,从输入1+2接收的信号和3+4上的输出仍将在输出1+2处以其原始形式存在。“Input(输入)”和“Output(输出)”参数: 选择用于输入和输出的成对通道。“Phase(相位)”模式: 可以设置为“No Change(无更改)”、“Invert Left Channel Only(仅翻转左通道)”、“Invert Right Channel Only(仅翻转右通道)”或“Invert Both Channels(翻转两个通道)”。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面