3.36 使用外部硬件FX录音——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
3.36 Recording with External Hardware FX
3.36 使用外部硬件FX录音

REAPER can record a track with an external hardware FX device in much the same way as you might use an external device as an insert when recording on an analog desk. You use a plug-in called ReaInsert. If you want to try it out step by step, create a new REAPER project file, insert a track, then get your FX device ready.
REAPER可以用外部硬件FX设备录制轨道,就像您在模拟桌面上录制时使用外部设备作为插入一样。您可以使用一个名为ReaInsert的插件。如果你想一步一步地尝试,创建一个新的REAPER工程文件,插入一条轨道,然后准备好你的FX设备。
Example
示例
1. Connect an otherwise unused audio output to the input for your FX device. Connect the output of your FX device to an otherwise unused audio input.
1.将未使用的音频输出连接到FX设备的输入。将FX设备的输出连接到其他未使用的音频输入。
2. Create a new REAPER project file and add a single audio track. Give this track a suitable name. Let’s record a vocal with the FX on it.
2.新建REAPER工程文件,添加一条轨道。给这条轨道起个合适的名字。让我们录制一段带有FX的人声。
3. Connect your microphone to an otherwise unused audio input. Switch on the FX Device.
3.将麦克风连接到未使用的音频输入。打开FX设备。
4. Arm the track for recording.
4.预备录音轨道。
5. Select the input device (to which the line or microphone is attached), select Monitor track media when recording and specify that you want to Record output and choose your required option (such as Mono, latency compensated), just as we did in the section Recording a Track's Output.
5.选择输入设备(线路或麦克风连接到该输入设备),选择“录音时监听轨道媒体”,指定“录音: 输出”并选择所需选项(如“单声道,延迟补偿”),就像我们在录制轨道输出一节中所做的那样。
6. Now display the FX Window for this track, and add the FX VST: ReaInsert to this window (see right).
6.现在显示此轨道的FX窗口,并将FX VST:ReaInsert添加到此窗口(见右)。
7. Specify the actual Hardware Sends and Returns that you set up at steps 1. and 3.
7.指定您在步骤1和3中设置的实际硬件发送和接收。
8. Make sure the FX Device mix is set to 100% Dry, and within ReaInsert enable the option Automatic device latency adjustment. This allows REAPER to calculate delay compensation as required.
8.确保FX设备混合设置为100%干声,并在ReaInsert中启用“Automatic device latency adjustment(自动设备延迟调整)”选项。这使得REAPER可以根据需要计算延迟补偿。
9. With the track’s output directed to your headphones, monitor the required Volume and FX Levels, including the FX Wet/Dry mix.
9.将轨道的输出指向您的耳机,监听所需的音量电平和FX,包括FX干湿混合比。
10. When you are ready, Record.
10.当你准备好后,录制下来。
11. When finished, don’t forget to disarm the track and set the ReaInsert plug-in status to Bypass.
11.完成后,不要忘记解除轨道的预备,并将ReaInsert插件状态设置为旁通。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面