13.42 使用MIDI通过ReaVoice控制音高变化——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
13.42 MIDI Controlled Pitch Shift with ReaVoice
13.42 使用MIDI通过ReaVoice控制音高变化

The ReaVoice plug-in can be used in conjunction with a recorded vocal track to create pitch shift harmonies. As with many other plug-ins, ReaVoice can be used in a number of ways. In this section we will take you thru just one example. After completing this example you should be able to experiment with this plug-in’s capabilities for yourself. The procedure for using ReaVoice is as follows:
ReaVoice插件可以与录制的轨道结合使用,以创建音高变化的和声。与许多其他插件一样,ReaVoice可以以多种方式使用。在这一节中,我们只带您看一个例子。完成此示例后,您应该能够亲自体验此插件的功能。ReaVoice的使用步骤如下:
? Record the Vocal Track.
1.录制人声轨道。
? Insert a new track immediately below the Vocal Track.
2.在人声轨道的下方插入一条新轨道。
? Create a send from the Vocal Track to the new track. Initially at least, this should be Pre FX.
3.创建一个从人声轨道到新轨道的发送。至少在最初,这应该是在FX前。
? Insert ReaVoice into the FX Window of the new track.
4.将ReaVoice插入到新轨道的FX窗口中。
? Arm this track for recording. Make your MIDI keyboard the Input Device and turn Input Monitoring on.
5.预备录音这条轨道,将您的MIDI键盘设置为输入设备,并打开输入监听。
? Mute all tracks except these two.
6.将除这两条轨道之外的全部轨道设为静音。
? Play the song. As you do so, play the keyboard, experimenting until you find an appropriate range of notes.
7.一边播放这首歌,一边弹键盘,不断尝试,直到找到合适的音符范围。
? Work out what you want to play, press W to return to the beginning, then Ctrl R to record. Stop recording when finished.
8.弄清楚要演奏的内容,按W返回开头,然后按Ctrl+R录制。完成后停止录制。
? If you do not have a MIDI keyboard, you can either use REAPER’s Virtual keyboard, or you can enter the notes by hand using the MIDI Editor.
9.如果您没有MIDI键盘,您可以使用REAPER的虚拟键盘,也可以使用MIDI编辑器手动输入音符。
? If you wish, you can record more than one take, selecting Play All Takes for the MIDI track items.
10.如果您愿意,您可以录制多个片段,为MIDI轨道对象选择“播放全部片段”。
? After finishing recording, you can use the MIDI Editor to polish your work.
11.完成录制后,您可以使用MIDI编辑器来润色您的作品。
Example
示例
In this example, you’ll have some fun and explore how ReaVoice works at the same time.
在本例中,您将获得一些乐趣,同时探索ReaVoice是如何工作的。
1. Open the file All Through The Night.rpp and save it as All Through The Night REAVOICE.rpp.
1.打开文件All Through The Night REAVOICE.rpp,并将其另存为All Through The Night REAVOICE.rpp。
2. Mute all tracks except the Vox track.
2.将除Vox轨道外的所有轨道静音。
3. Move the Vox track to the top, select it and press Ctrl T to insert a new track. Your Vox track is now track 1 and the new track is track 2.
3.将Vox轨道移到顶部,选择它,然后按Ctrl+T插入新轨道。您的Vox轨道现在是轨道1,新轨道是轨道2。
4. Name the new track Vox MIDI.
4.将新轨道命名为“Vox MIDI”。
5. Display the Routing window for the Vox MIDI track and add a new Pre FX Receive on Audio 1/2 from the Vox track.
5.显示Vox MIDI轨道的路由窗口,并添加一个来自Vox轨道音频1/2的新的FX前接收。
6. Insert the ReaVoice plug-in into the FX chain for this track. For now make its settings as shown above. Note in particular the number of voices and the long sustain setting.
6.将ReaVoice插件插入到此轨道的FX链中。现在进行如上所示的设置。请特别注意“number of voices(人声数量)”和“long sustain(延音长度)”的设置。
7. In the Vox MIDI track, insert an empty MIDI item from about the 13 sec mark to about the 50 sec mark. This should coincide with the first vocal passage on the Vox track.
7.在Vox MIDI轨道中,在从大约13秒标记到大约50秒标记之间,插入一个空白MIDI对象。这应该与Vox轨道上的第一个人声段落一致。
8. Double click on this to open it in the MIDI Editor.
8.双击它以在MIDI编辑器中打开它。
9. Create a pattern of notes similar to that shown above. You don’t need to follow this precise pattern!.
9.创建一个类似于上面所示的音符样式。你不需要遵循这个精确的样式!
10. As you play the song, make sure that the two vocal tracks are soloed. You can of course edit any individual note or notes, for example, by moving them up or down, by lengthening them or shortening them, or by changing their pitch. Here are some more possibilities, just for fun and to give you some ideas.
10.当你播放这首歌时,要确保这两条人声轨道是独奏的。当然,你可以编辑任何一个或多个音符,例如,通过向上或向下移动它们,通过延长或缩短它们,或者通过改变它们的音高。这里还有一些可能性,只是为了好玩,给你一些想法。
11. Within the MIDI Editor window, press Ctrl A to select all events.
11.在MIDI编辑器窗口中,按Ctrl+A选择全部事件。
12. Press Ctrl F2 to display the Event Properties dialog box.
12.按Ctrl+F2显示事件属性对话框。
13. Select Note as the Event Type. In the Note value box, type +2 (as shown) then click on OK. This raises the entire selection by two semitones.
13.在事件类型中选择音符。在音高值框中,键入“ +2 ”(如图所示),然后单击确定。这会使整个选择增加两个半音。
14. Play the song. Notice the vocal effect!
14.播放这首歌。注意人声效果!
15. Experiment with other settings as you wish. Save the file finished.
15.根据您的需要尝试其他设置。保存文件完成。
16. Now experiment with adjusting some of the ReaVoice settings.
16.现在尝试调整一些ReaVoice设置。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面