11.16 避免通道串音——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
11.16 Avoiding Channel Leakage
11.16 避免通道串音

You need to be aware when you are using multiple channels for the Master Track that any signal routed along any channels between tracks will also be sent to the Master.
当您对主控轨使用多个通道时,您需要知道,沿轨道之间的任何通道路由的任何信号,也将被发送到主控。
For example, you might be using channels 3/4 in one or more of your tracks for some other purpose.
例如,您可能将一条或多条轨道中的通道3/4用于其他目的。
In that case, if you also used channels 3/4 for the purpose outlined in the above example, then the signal on channels 3/4 of your tracks would also be leaked into the signal being fed to your reverb plug-in.
在这种情况下,如果您还将通道3/4用于上述示例中概述的目的,则轨道的通道3/4上的信号,也会串音馈送到混响插件的信号中。
This channel leakage can be avoided simply by reserving for the Master a pair or pairs of channels not used elsewhere in the project - in this example, you might choose to use Channels 5/6 or Channels 11/12.
只需为主控保留工程中其他地方未使用的一对或多对通道,即可避免通道串音——在本例中,您可以选择使用通道5/6或通道11/12。
Since you have up to 64 channels available to you, this should not normally present you with any problem.
由于您最多有64个通道可用,这通常不会给您带来任何问题。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面