12.8 轨道视图屏幕集——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
12.8 Track View Screen Sets
12.8 轨道视图屏幕集

Screen Sets enable you to save several different views of your project, so that you can easily select and recall them when editing or arranging. There are two types of Screen Set - Track Views and Windows.
屏幕集使您能够保存工程的多个不同视图,以便您在编辑或排列时可以轻松地选择和调用它们。有两种类型的屏幕集-轨道视图和窗口。
Track Views are created and saved on a per project basis - the screen set data is stored in the project's .RPP file and can be recalled only when you are working with that project file. Using track view screen sets can be especially useful when you are editing or in some other way working closely with media items.
“轨道视图”是基于每个工程创建和保存的-屏幕集数据存储在工程的.RPP文件中,只有在使用该工程文件时才能调用。当您正在编辑或以某种其他方式密切处理媒体对象时,使用轨道视图屏幕集可能特别有用。
Windows screen sets are global and are stored in the Application Data screensets.ini file. They can be recalled from, and applied to, any project file.
“窗口屏幕集”是全局的,存储在Application Data screensets.ini文件中。它们可以从任何工程文件中重新调用,以及应用于任何工程文件。
The procedure for creating track views is:
创建轨道视图的步骤如下:
? Use the View, Screensets/Layouts command to show the Screen Sets window (the default keyboard shortcut is Ctrl E). The Screen Sets window may be docked (or undocked), or pinned to stay on top.
1.使用“视图”--“屏幕集/布局”命令显示屏幕集窗口(默认键盘快捷键为Ctrl+E)。屏幕集窗口可以停靠(或取消停靠),也可以固定在顶部。
? Adjust your track layouts to suit.
2.调整您的轨道布局以适合您的需要。
? Select a number from the Track views page of the Screen Sets window.
3.从屏幕集窗口的轨道视图页面选择一个编号。
? Click on Save and name the set.
4.单击保存并命名该集。
You can create up to 10 track view screen sets per project. To recall a view, double click on its name.
每个工程最多可以创建10个轨道视图屏幕集。要重新调用视图,请双击其名称。
You can also assign keyboard shortcuts to individual screen sets. By default, Shift F4 to Shift F6 are used to save your first three track views, and F4 to F6 are assigned to load each of these first three track views.
您还可以将键盘快捷键分配给各个屏幕集。默认情况下,Shift+F4到Shift+F6用于保存前三个轨道视图,F4到F6指定用于加载前三个轨道视图中的对应视图。
If you want to modify these, or assign shortcuts to other track views, then you should click on the Edit shortcuts button in the Screensets window. This opens the Action List Editor. For instructions on how to use the Action List Editor, see Chapter 15.
如果要修改这些内容或将快捷键指定给其他轨道视图,则应单击屏幕集窗口中的编辑快捷键按钮。这将打开操作列表编辑器。有关如何使用操作列表编辑器的说明,请参阅第15章。
Notice that there is also an option available to Auto save when switching screen sets. If enabled, this ensures when switching from one screen set to another that any changes made to the layout of the first of these screen sets will be saved. The Edit fields... button can be used to “tweak” this, so that only certain aspects of your changes are automatically saved.
请注意,切换屏幕集时也有一个自动保存选项可用。如果启用,这可确保在从一个屏幕集切换到另一个屏幕集时,保存对第一个屏幕集的布局所做的任何更改。“编辑字段...”按钮可以用来“调整”它,这样只有某些方面的更改会被自动保存。
Example
示例
1. Open the file All Through The Night.RPP and save it as All Through The Night TRACK VIEWGRAPH.
1.打开All Through The Night.RPP文件,并将其另存为All Through The Night TRACK VIEWGRAPH。
2. Adjust the track height of your Vox track as shown here (above).
2.调整Vox轨道的轨道高度,如上图所示。
3. Choose the View, Screensets/Layouts command and display the Track Views page, click on 1, then Save to open the Save Track View dialog (below).
3.选择“视图”--“屏幕集/布局”命令,并显示轨道视图页面,单击1,然后单击“保存”以打开保存轨道视图对话框(如下所示)。
4. Type: Vox View but do not yet press Enter.
4.输入:“Vox View”,但不要按回车键。
5. Take a look at the five options that are available. We'll examine these shortly. For this exercise, make sure that only Track control panel status is selected.
5.看一下可用的五个选项。我们很快就会检查这些内容。在本练习中,请确保仅选择了“轨道控制面板状态”。
6. Click on Save.
6.单击保存。
7. Now adjust the track heights so that all tracks are minimized except the two guitar tracks. Make these two tracks high enough to show all track controls.
7.现在调整轨道高度,使除两条吉他轨道外的所有轨道都最小化。使这两条轨道高度足够高,以显示所有轨道控件。
8. In the Track views window, click on 2.
8.在轨道视图窗口中,单击2。
9. Click on Save to open the Save Track View window.
9.单击“保存”以打开保存轨道视图窗口。
10. Again make sure that only Track control panel status is enabled and type Guitars View. Press Enter.
10.再次确保仅启用“轨道控制面板状态”,然后键入“Guitars View”。按回车键。
11. To switch between these track layouts, double-click on their names in the Screen Sets window.
11.要在这些轨道布局之间切换,请在屏幕集窗口中双击它们的名称。
This simple example has introduced you to screen sets and how to use them. Because we selected only the option Track control panel status the project track layout was the only information saved with this screen set. Notice the five options that you may choose to include in or exclude from a track view: Track Cursor Position Track Control Panel Status Horizontal Zoom Track Scroll Position Track Mixer Status To remove any screen set that you do not wish to keep, simply select it and click on the Clear button.
这个简单的示例向您介绍了屏幕集以及如何使用它们。因为我们只选择了“轨道控制面板状态”选项,所以工程轨道布局是与此屏幕集一起保存的唯一信息。请注意,您可以选择包括在轨道视图中,或从轨道视图中排除的五个选项:轨道光标位置、轨道控制面板状态、水平缩放、轨道滚动位置、轨道调音台状态。要删除您不想保留的任何屏幕集,只需选择它并单击清除按钮即可。
Track Mixer Status
轨道调音台状态
Notice that one of the options that you have when saving track view screen sets is Track Mixer status. This option can be used to save any Track Manager settings regarding which tracks are and are not displayed in the Mixer at any time. Switching between different track views would then automatically select different selections of tracks to be shown in the Mixer.
请注意,保存轨道视图屏幕集时有一个选项是“轨道调音台状态”。此选项可用于随时保存有关调音台中,显示和不显示的轨道的任何轨道管理器设置。然后,在不同的轨道视图之间切换,将自动选择要在调音台中显示的轨道的不同选择。
Do not confuse this with the option Mixer flags in Windows screen sets, which allows you to select not which tracks but which mixer elements and options (FX inserts, sends, multiple rows, etc.) are applied.
不要将其与窗口屏幕集中的选项“调音台标志”混淆,后者允许您选择要应用的调音台元素和选项(比如:FX插入、发送、多行等),而不是选择哪些轨道。
Note: As you adjust track panel height and/or width, the display area for track controls will become smaller or larger. Some may disappear or reappear. An example is shown here.
注: 调整轨道面板高度/宽度时,轨道控件的显示区域将变小或变大。有些可能会消失或重新出现。此处显示了一个示例。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面