3.42 录制互联网音频流——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
3.42 Recording an Internet Audio Stream
3.42 录制互联网音频流

You can use REAPER to record an audio stream from the internet. Before doing so you should make sure that you are not in breach of any copyright restrictions. The exact method will depend on your hardware setup, including your sound card. Your sound card should include some sort of software for changing its settings. This may or may not have its own icon within the Windows Control Panel. If you are not sure how to access it, you can click on the Windows Start button, choose Run, then type sndvol32 -r and press Enter. In overview, these are the steps that you will need to perform.
您可以使用REAPER录制来自互联网的音频流。在这样做之前,您应该确保您没有违反任何版权限制。具体方法取决于您的硬件设置,包括声卡。您的声卡应该包含某种用于更改其设置的软件。这可能在Windows控制面板中有自己的图标,也可能没有。如果您不确定如何访问它,可以单击Windows开始按钮,选择运行,然后键入“sndvol32 -r”并按回车键。总而言之,以下是您需要执行的步骤。
1. Access your sound cards control software and modify its settings to select (depending on the options available) the required option. You should probably temporarily disable input from all other sources (Microphone, Line, etc).
1.访问声卡控制软件,并修改其设置,以选择(取决于可用选项)所需选项。您可能应该暂时禁用所有其他来源(麦克风、线路等)的输入。
2. Open your web browser and find the page containing the item that you wish to record.
2.打开Web浏览器,找到包含要录制的项目页面。
3. Open REAPER, create a new file and add a track.
3.打开REAPER,新建文件,添加轨道。
4. The next step may require a little experimentation. Depending on the equipment you are using, it might be necessary to change your Options, Preferences, Audio, Devices settings to Direct Sound. An example is shown here. These settings may not be the best for your particular system.
4.下一步可能需要一些实验。根据您使用的设备,可能需要将“选项”、“首选项”、“音频”、“设备”设置更改为“DirectSound”。此处显示了一个示例。这些设置可能不适合您的特定系统。
5. Arm your track for recording: be sure to select the correct input.
5.预备录音轨道:确保选择正确的输入。
6. Press Ctrl R to start recording. In your web browser, play the item that you wish to record. When finished, stop recording and save your work.
6.按Ctrl+R开始录制。在Web浏览器中,播放要录制的项目。完成后,停止录制并保存您的工作。
Note: Don’t forget when you have finished, to restore both your Sound Card Recording Control options and REAPER’s Audio Device Preferences to their previous settings.
注意:当您完成后,不要忘记将声卡录制控制选项,和REAPER的音频设备首选项,恢复到以前的设置。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面