|
|
马上注册，浏览本站更多内容。
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
楼主 琴韵晓波说：
2.29 The Track Wiring View
2.29 轨道布线视图
Until now, there have been three main ways of managing track routing within REAPER.
到目前为止,有三种主要的方式来管理REAPER内的轨道路由。
Drag and drop in TCP or MCP view.
在tcp或mcp视图中拖放。
Using a track’s routing window.
使用轨道的路由窗口。
Using the Routing Matrix.
使用路由矩阵。
Now you have a fourth option - Track Wiring.
现在您有了第四个选项-轨道布线。
Track Wiring view cannot just be used to create routing: it alsogives you an overview of your project’s routing, and allows you to manage it. For example, it can help you to identify any routing you may have created and forgotten about, but which needs to be deleted.
轨道布线视图不只是用来创建布线:它还可以让您概述工程的布线,并允许您对其进行管理。例如,它可以帮助您识别您可能创建并忘记了但需要删除的任何路由。
This section introduces you to Track Wiring and explores its environment. Track Wiring is accessed directly fromthe View menu.
本节介绍轨道布线,并探索其环境。可从“视图”菜单直接访问“轨道布线”。
Let’s start with a simple example.
让我们从一个简单的例子开始。
Above you see the track wiring view for a project with two recorded tracks and one reverb track.
在上面,您可以看到一个工程的轨道布线视图,该工程有两条录制的轨道,和一条混响轨道。
The solid straight white lines depict sends to the master.
白色实线描绘的是发送给主控的信息。
Click and hold on any track name to drag and drop it around at will.
单击并按住任何轨道名称,可以随意拖放它。
The curved lines represent sends from one track to another (from each recorded track to the reverb track.
曲线表示从一个轨道到另一个轨道(从每个录制轨道到混响轨道)的发送。
The little arrow next to the track number can be used to collapse/expand the display of detailed track information for individual tracks. This can be especially useful if your file has a large number of tracks and/or more complex routing (as shown in the second example above). Notice also how the two folders (Vocals and Music) and their child tracks are depicted.
轨道编号旁边的小箭头,可用于折叠/展开各个轨道的详细轨道信息显示。如果您的文件有大量轨道或更复杂的路由(如上面的第二个示例所示),这会特别有用。另请注意两个文件夹(Vocals和Music)及其子级轨道的描述方式。
In “normal” mode for each track the following overview information is displayed: track number and name, media,fx, fader information, channels and any sends.
在“正常”模式下,每个轨道都会显示以下概览信息:轨道编号和名称、媒体、FX、推子信息、通道和任何发送。
Here is an example (right).
这是一个例子(右)。
The Gtr Neck track shown here contains media, one FX (ReaComp) one send (to the Reverb track) and a send to the master. It uses two channels (hence the two vertical lines on the right).
此处显示的Gtr Neck轨道包含媒体、一个FX(ReaComp)、一个发送(到混响轨道)和一个发送到主控。它使用两个通道(因此右边有两条垂直线)。
The Reverb track contains no media, has receives from tracks 1 and 2, contains ReaVerbate and also directs its two channel output to the master.
混响轨道不包含媒体,具有从轨道1和2接收的内容,包含ReaVerbate,并且还将其两个通道输出定向到主控。
● Click on any FX name to open its UI - you can then adjust any of its parameters, and/or access its the pin connector. Click where shown here (right) to show all routing information for that FX.
单击任何FX名称打开其UI,然后可以调整其任何参数,或访问其针脚连接器。单击此处显示的位置(右侧)以显示该FX的所有路由信息。
Click on the text “Fader” to open the routing window for that track: this has the same effect as clicking on the Route button in the TCP or MCP. Here you can modify, add or delete sends and/or receives for this track.
单击文本“推子”以打开该轨道的路由窗口:这与单击Tcp或MCP中的路由按钮具有相同的效果。您可以在此处修改、添加或删除此轨道的发送和接收。
You can click and drag in Track Wiring view to create new sends between tracks. The send type will be determined by exactly where you position the mouse before dragging:
可以在轨道视图中,单击并拖动,以在轨道之间创建新发送。发送类型,将由您在拖动之前,放置鼠标的确切位置确定:
Hover the mouse over the “body” of any track box (as shown below right) and you will see three boxed tiny + symbols on the left side of the track box.
将鼠标悬停在任何轨道框的“主体”上(如右下图所示),您将在轨道框的左侧看到三个带框的小+符号。
Click and drag from the symbol beside the first FX in the FX chain to the destination track to create a Pre FX send.
从FX链中第一个FX旁边的符号单击并拖动到目标轨道,以创建FX前发送。
Click and drag from the symbol beside the box labeled “Fader” to the destination track to create a Pre fader (Post FX) send.
从标记为“推子”的方框旁边的符号中,单击并拖动到目标轨道,以创建一个推子前(FX后)发送。
Click and drag from the symbol beside the box labeled “Master” to the destination track to create a Post fader (Post FX) send.
从标记为“主控”的方框旁边的符号中,单击并拖动到目标轨道,以创建推子后(FX后)发送。
You can also modify MASTER settings in Track Wiring view:
还可以在轨道关联视图中修改主控设置:
Click on any FX listed within the MASTER box to open its UI, where you can adjust any of its parameters.
单击主控框中列出的任何FX,以打开其UI,您可以在其中调整其任何参数。
Within the MASTER box, click on the text “Fader” to open its hardware outputs window, Here you can add, adjust, or remove hardware outputs.
在主控框中,单击文本“推子”,以打开其硬件输出窗口,您可以在此添加、调整或删除硬件输出。
Other points to note are:
其他需要注意的事项包括:
Within any track box, click on the text “Send” to open the control window for that send. Here you can modify or delete this send, for example to change the send type, adjust volume and/or pan, or specify destination channels.
在任何轨道框中,单击文本“发送”,以打开该发送的控制窗口。您可以在此处修改或删除此发送,例如更改发送类型、调整音量或声像,或指定目标通道。
The more complex the project, the more complex the track wiring diagram. This is where the context menu can be helpful. Right click anywhere in the Track Wiring window to display the menu shown below.
工程越复杂,轨道布线图就越复杂。这就是上下文菜单可以提供帮助的地方。在轨道布线窗口中的任意位置,单击鼠标右键以显示如下所示的菜单。
You can “unclutter” the diagram using any or all of the three toggle options shown:
您可以使用图中显示的三个切换选项中的任意一个或全部选项来“整理”图表:
Only show wires on track on mouseover Only show hardware output/input wires on track mouseover Show routing controls when creating send/hardware output.
“鼠标悬停在轨道上时仅显示布线”,“鼠标悬停在轨道上时仅显示硬件输出/输入布线”,“创建发送/硬件输出时显示路由控件”。
If you get into a tangle after dragging and dropping things around, Reset all track positions will get you out of trouble!
如果你在拖拽东西后陷入混乱,“重置全部轨道位置”会让你摆脱麻烦!
● The option Show input activity indicators, if enabled, will cause MIDI and audio inputs to light up in response to any input signal.
“显示输入活动指示器”选项(如果启用)将导致MIDI和音频输入响应任何输入信号而亮起。
● You can use the dropdown list (top left corner of window) to switch between any of the four listed view modes - routing matrix, wiring, track grouping matrix, and region render matrix. This can be especially useful for switching between the track wiring diagram and the routing matrix.
您可以使用下拉列表(窗口左上角)在列出的四种视图模式(“路由矩阵”、“布线”、“轨道编组矩阵”和“区间渲染矩阵”)之间切换。这对于在轨道布线图和路由矩阵之间切换特别有用。
This menu also includes the option to Dock or Undock this window. Docking is explained in the sectionimmediately following this one.
此菜单还包括停靠或取消停靠此窗口的选项。停靠将在紧随其后的一节中进行解释。
|
|
发表于 2021-6-28 17:24:18
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
楼主
免责声明：本站网友发表的言论属其个人观点，与本站立场无关！