3.24 录制多个附加对象——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
3.24 Recording Multiple Additional Items
3.24 录制多个附加对象

We have seen how to use REAPER to record multiple takes on the same tracks. Later, Chapter 8 explains how to organise and edit these, taking the best parts from various takes and patching them together into a single take.
我们已经看到了如何使用REAPER在同一轨道上录制多个片段。以后,在第8章中,我们将向你展示如何组织和编辑这些片段,以便从几个片段中选取最好的部分,然后将它们拼凑成一个单独的片段。
Instead of using multiple takes, however, you may wish to record new items onto an existing track, perhaps overlapping. This is one case where free item positioning gives you greater flexibility. By default, free item positioning is disabled. To record extra items (rather than takes) on to an existing track, follow this sequence:
不过,您可能希望将新对象录制到现有轨道上,而不是使用多个片段,可能会出现重叠。这是“自由摆放对象位置”给你带来的更大灵活性的一种情况。默认情况下,“自由摆放对象位置”处于禁用状态。要将附加的对象(而不是片段)录制到现有轨道,请按照以下顺序操作:
1. Set record mode to normal (Options, Record Mode: Normal).
1.将录音模式设置为正常(“选项”--“录音模式: 正常”)。
2. Turn on Free Item Positioning (FIPM) for the track being recorded. Right click on the track’s Track Control Panel and select Free item positioning if this is not already ticked.
2.为正在录制的轨道启用“自由摆放对象位置”(FIPM)。右键单击轨道的轨道控制面板,如果尚未勾选,则选择“自由摆放对象位置”。
3. Record your first item for the track.-
3.为轨道录制你的第一个对象-
4. Position the cursor at the point where you wish to record the second item. Record this item.
4.将光标定位到您想要录制第二个对象的位置。录制此对象。
5. Repeat step 4. as often as required.
5.根据需要重复步骤4。
Example
示例
In the first screen shot here, Track 1 contains a Vocal Track and Track 2 a Vocal Harmony for part of the song.
在这里的第一个屏幕截图中,轨道1包含一个人声曲目,轨道2包含声乐和声部分的一个人声。
In the second, the option for Free item positioning (FIPM) has been enabled for Track 2. The mouse cursor shows a small handle that can be used to adjust the height of this media item.
在第二个版本中,已为轨道2启用了“自由摆放对象位置”(FIPM)选项。鼠标光标显示一个小手柄,可用于调整此媒体对象的高度。
In the third screen shot, a second Vocal Harmony has been recorded on to Track 2, overlapping the original harmony.
在第三个屏幕截图中,第二个人声和声被录制到第二条轨道上,与原来的和声重叠。
Notice that this is not an alternative take of the first harmony, but an additional media item.
请注意,这不是第一个和声的替代片段,而是一个附加的媒体对象。
Note 1: Enabling Offset overlapping media items vertically (Options menu) will ensure that overlapping items are shown this way, whether editing or recording.
注1:启用“垂直偏移重叠的媒体对象”(选项菜单)将确保重叠的对象以这种方式显示,无论是编辑还是录音。
Note 2: Options, Preferences, Project, Track/Sends Defaults includes an option to make free item positioning enabled for your tracks by default.
注2:“选项”、“首选项”、“工程”、“轨道/发送默认设置”包括一个选项,可使您的轨道在默认情况下启用“自由摆放对象位置”。
Note 3: Options, Preferences, Project, Item Fade Defaults includes an option whether or not to crossfade overlapping recorded items.
注3:“选项”、“首选项”、“工程”、“对象淡变默认设置”包括是否交叠淡变重叠的已录制对象的选项。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面