6.15 插件延迟补偿——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
6.15 Plug-in Delay Compensation
6.15 插件延迟补偿

By default, REAPER uses plug-in delay compensation (PDC) to ensure that the audio from your tracks remains time aligned. This, for example, is likely to be needed when one or more FX chains includes a plug-in such as reverb. In most circumstances it would be unwise to alter REAPER’s default PDC settings.
默认情况下,REAPER使用插件延迟补偿(PDC)来确保轨道中的音频保持时间一致。例如,当一个或多个FX链包含诸如混响之类的插件时,可能需要这样做。在大多数情况下,更改REAPER的默认PDC设置是不明智的。
Nevertheless the FX chain FX menu allows you to manage Chain PDC mode for an item or track by setting it to Per chain compensation, Per FX compensation or to Ignore plug-in delay. For the master track, there is also an option to select Hardware output compensation.
尽管如此，FX链FX菜单允许您通过将其设置为“按链补偿”、“按FX补偿”或“忽略插件延迟”来管理对象或轨道的“链PDC”模式。对于主控轨,还有一个选项可以选择硬件输出补偿。
An option is also available from the x in/ x out button context menu of individual plug-ins. Adjustments can be made to compensate for any latency caused by a plug-in. The latency for any track is displayed in the bottom left corner of its FX chain window. The track media is read in advance, allowing it to be heard at the correct time, but input monitoring is delayed.
各个插件的x in/x out按钮上下文菜单中也提供了一个选项。可以进行调整以补偿插件引起的任何延迟。任何轨道的延迟都显示在其FX链窗口的左下角。轨道媒体是预先读取的,因此可以在正确的时间收听,但输入监听会延迟。
If you find that PDC is creating problems (for examples, dropouts or excessive latency) then it can be disabled for any plug-in from the pin connector button (shown above labelled “2 in 2 out”) context menu. Note too that PDC is disabled when feedback routing is employed.
如果您遇到PDC产生问题的情况(例如,丢失或延迟过长),则可以通过针脚连接器按钮(上面标记为“2in2out”)上下文菜单,为任何插件禁用PDC。还要注意的是,当采用反馈路由时,PDC被禁用。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面