23.4 将音频从另一个DAW应用发送到REAPER——REAPER用户手册中文版

琴韵晓波

楼主 琴韵晓波说：
23.4 Sending Audio From Another DAW App to REAPER
23.4 将音频从另一个DAW应用发送到REAPER

Staying with the same example, we are now going to use ReaRoute to take our open Sonar project and send an audio signal back to REAPER. In overview, this is how it is done.
继续使用相同的示例,我们现在将使用ReaRoute来获取我们打开的SONAR工程,并将音频信号发送回REAPER。综的来说,这就是它是如何做到的。
1. Open REAPER and create a new project file. Insert as many tracks as you need.
1.打开REAPER,新建工程文件。根据需要插入任意数量的轨道。
2. Assign ReaRoute inputs to these tracks as required (see right). Arm these tracks for recording.
2.根据需要将ReaRoute输入分配给这些轨道。预备这些轨道,以便录音。
3. Open the other DAW. In that DAW, open the file you wish to work on, and assign outputs on a track by track basis to your various ReaRoute channels as required.
3.打开另一个DAW。在DAW中,打开您希望处理文件,并根据需要将逐个轨道的输出分配给各种ReaRoute通道。
4. Still in the other DAW, insert any FX that you may wish to use in these tracks. Play the song in the other DAW, adjusting your FX to suit.
4.仍然在其他DAW中,插入您可能希望在这些轨道上使用的任何FX。在另一个DAW中播放歌曲,根据需要调整FX。
5. When ready, start recording in REAPER, then play the song in the other DAW, from the beginning.
5.准备好后,开始在REAPER中录制,然后在另一个DAW中从头开始播放歌曲。
6. When finished, stop both playback and recording.
6.完成后,停止播放和录制。

琴韵晓波

沙发 琴韵晓波说：
点此转到本章目录    点此转到总目录——【本文译者：王晓波，出处：视障者音乐制作交流基地】    点此转到REAPER+SWS+OSARA中文语言包下载页面